Here at ALII our consultants ensure that our clients maintain an appropriate measure of compliance with environmental regulations. We pride ourselves on having deep knowledge on environmental regulations, which we use to advise our clients in the private industry or public government institutions to help them steer clear of possible fines, legal action or misguided transactions.

We provide construction services such as Asbestos Hazard Assessments or Lead Hazard Assessments or conducting due diligence reports for our clients.

Our on call laboratory is a full-service laboratory offering asbestos analysis in Phase Contrast Microscopy (PCM), Polarized Light Microscopy (PLM), and Transmission Electron Microscopy (TEM). We can provide quality analytical results along with rapid turnaround times within three hours. Their polarized light microscopes used for bulk asbestos analysis are designed by Leica for a wide variety of applications such as petrography, mineralogy, and materials analysis. The latest energy dispersive x-ray analysis (EDXA) and Scan Active Digital Imaging technology from Evex can be utilized by Hitachi H-600 TEM and Hitachi H-600 TEM/STEM (scanning capabilities) Electron Microscopes. We offer a complete line of analytical testing for all different types of matrices, and we are dedicated to superior customer service and maintaining a level of standard at every facet of analysis and reporting.

Analytical Services

• Airborne Fiber Analysis by Phase Contrast and Transmission Electron Microscopy
• NIOSH 7400
• NIOSH 7400 with OSHA 8hr Time Weighted Average
• AHERA (40 CFR, Part 763, Subpart E, Appendix A)
• Yamate Level II
• NIOSH 7402

Bulk Asbestos --Analysis by Polarized Light and Transmission Electron Microscopy

• PLM EPA Method: 600/R-93/116
• PLM EPA 400 Point Count
• PLM EPA 1000 Point Count
• PLM EPA NOB with Gravimetric Reduction Prep - EPA/600/R-93/116
• PLM NY ELAP 198.6
• NIOSH 9002
• TEM EPA NOB-EPA/600/R-93/116
• TEM Chatfield
• TEM NY ELAP 198.4

Water Analysis for Asbestos by Transmission Electron Microscopy

• TEM EPA 100.2

Dust Analysis for Asbestos by Transmission Electron Microscopy

• ASTM D5755-03: Micro-vacuum Samples
• ASTM D6480-05: Wipe Surface Samples

Soil Analysis for Asbestos by Polarized Light Microscopy

• PLM EPA 600/R-93/116 (qualitative analysis)

Analysis design for rocks, soil, and vermiculite testing
California Air Resource Board 435 (LOD less than 1%, 0.25%, and 0.1%) available.

Here at ALI we have over 30 years of building demolition, wrecking and dismantling experience. Our highly-skilled and safe workforce, along with a comprehensive range of modern demolition equipment, are prepared to perform the demolition of one structure, an entire plant or facility. Our industrial and commercial demolition services include:

• Building Demolition Contractors Services
• Total Plant and Facility Demolition and Wrecking
• Selective Demolition and Dismantlement Contracting Services
• Concrete or Steel Silo Demolition
• Foundation, Slab and Footing Removal
• Water Tower, Radio Tower Dismantlement
• Technical and Standard Demolition Services
• Industrial and Commercial Demolition Services

Our experienced operators employ safety specific techniques in the razing of residential structures, where tight situations can exist. A thorough hazard assessment is conducted prior to demolition activities, in addition to creating a materials staging and disposal plan.

Do you know that the prolonged inhalation of asbestos fibers can cause serious illnesses, including malignant lung cancer, mesothelioma, and asbestosis (a type of pneumoconiosis)?

Where Asbestos is found?
Asbestos containing materials can be found in a variety of products used in the construction and renovation of homes. There are over 3000 products made with asbestos, and some still being used today.

Asbestos may be found in materials such as: insulation around pipes, ducts, and furnaces, ceiling tiles, ceiling texture, vinyl flooring and mastics, spray on acoustical insulation, artificial fireplace ashes and embers, wallboard patching and joint compounds, plaster, soils, "popcorn" ceilings, attic insulations, exterior roofing products, siding, and concrete water mains. Many buildings contain asbestos, which was used in spray-applied flame retardant, thermal system insulation, and in a variety of other materials. Our team of specialty trained inspectors will come and conduct a 100% check to see if your establishment contains any asbestos hazards.Did you know the Law requires notifying local, state, and federal agencies before you begin any renovation? Click here for more information!

Our Abatement Process

Our process of removing asbestos is comprised of several key steps.

1. First the targeted area to be abated is completely isolated from adjacent areas. This is done with the placement of impermeable barriers, usually high thickness vinyl and/or plastic sheeting, which is completely sealed at its perimeter by duct tape.

2. Holes in floors and mechanical equipment areas are sealed and plugged to form clean room environment. Special air filters and vacuum units are then installed within these clean rooms. During removal process, these filters will contain, isolate and monitor the air and allow for testing of any trace amounts of free asbestos.

3. Asbestos removal workers enter the clean area via special airlocks, clothed in tyvek suits. The asbestos is usually dampened to facilitate its aggregation and removal. The removal itself is done by hand, with workers placing the abated material into special bags, each of which is sealed and tagged prior to removal from the clean area. The sealed bags are then transported to licensed disposal sites.

4. Before, during and after the abatement process, continual air monitoring is in place. The data collected is transmitted to independent testing labs for analysis and reporting.